Contemporary Fiberglass – Maxum 280

Scott from Contemporary Fiberglass sent us a few photos of a custom SeaDek kit on a Maxum 280. This kit consists of 6mm camel over mocha faux teak dash pads and a swim platform pad for the Safe Step custom extended swim platform. Thanks Scott!

Maxium1Maxium3

To order custom SeaDek for your boat, please contact customer service at: customerservice@seadek.com or 321-632-4466.

Contemporary Fiberglass:
10907 E. Marietta Ave., Suite 2, Spokane Valley, WA, 99206-6620
Email: parrotheadinwa4@comcast.net
www.myswimplatform.com

Posted in Contemporary Fiberglass, Custom SeaDek, custom swim platform pads, faux teak, marine nonskid, marine products, no slip seadek, seadek, SeaDek Marine Products | Tagged , , , , , , , , , , , , , | Comments Off on Contemporary Fiberglass – Maxum 280

HydraSports 2250 – DIY SeaDek – Part 1

Here’s a great SeaDek Sheet Material DIY post from The Hull Truth (www.thehulltruth.com) that was written by our customer Jared:

“Felt like I should contribute to the forum and will post my experience with doing SeaDek myself. I ordered two of their large rolls of the gray and will be making my own templates, cutting them, and putting it down.

First, make the templates:

Step1 Step2 Step3

We used a clear material, cut to size, and held down with painters tape. Next using a straight edge and sharpie we did all the straight lines, then did the corners by hand:

Step4 Step5 Step6

Make sure you clearly mark each piece and where they go:

Step7

Next we made a working table with a piece of plywood, put the SeaDek upside down on top of it, and taped the templates on top:

Step8

Step9

After we cut them, for the corners we used scissors and rounded the edge, then sanded down the corners to not have any sharp corners. Also you can sand down any imperfections of your straight edge cuts if you messed up slightly:

Step10

Those are our pieces we made. Going to put them on boat tomorrow and will post pictures of the results. Probably will make some more templates with any remaining material and get them on the boat as well.

Thanks for the great step by step instructions Jared! Stay tuned for Part 2 of the DIY process!

Original post on The Hull Truth: www.thehulltruth.com/boating-forum/662305-diy-seadek-hydrasport-2250-a.html

SeaDek Sheet Material comes in a variety of colors and sizes. To order sheet material for your next DIY project, visit: www.seadek.com/c-5-sheet-material.aspx.

Posted in Customer Photos, DIY, marine nonskid, marine products, no slip seadek, seadek, SeaDek Marine Products | Tagged , , , , , , , , , , , , , , , | Comments Off on HydraSports 2250 – DIY SeaDek – Part 1

IFA Kayak Fishing Tour – Team SeaDek

Pepi of Team SeaDek competed in the IFA Kayak division on March 29th, and came in 5th place out of 67 anglers. Congratulations Pepi!

Kayak_Pepi

11875322243_52d947c146_o

For more information on the IFA Kayak Fishing Tour, visit: www.ifatours.com/kayak-tour

Posted in Custom SeaDek, Fishing with SeaDek, Kayak products, Kayaks, marine nonskid, marine products, no slip seadek, seadek, SeaDek Marine Products | Tagged , , , , , , , , | Comments Off on IFA Kayak Fishing Tour – Team SeaDek

Diablo Paddlesports Amigo – Stock Kit

Our customer Joel sent in a couple pictures of his SeaDeked Diablo Paddlesports Amigo (diablopaddlesports.com). This kayak is covered in a 5mm thick, army camo stock kayak kit. Thanks for the pictures Joel!

Diablo1 Diablo2

Stock kits for the Diablo Amigo are available on our webstore in storm gray and army camo: www.seadek.com/p-465-diablo-paddlesports-amigo.aspx

For additional colors and custom graphics, please contact customer service at: customerservice@seadek.com or 321-632-4466.

Posted in Fishing with SeaDek, Kayak products, Kayaks, marine nonskid, marine products, no slip seadek, seadek, SeaDek Marine Products | Tagged , , , , , , , , , , , , | Comments Off on Diablo Paddlesports Amigo – Stock Kit

1997 Carver Santego 380 – Swim Platform Pad

Eric, one of our customers from Louisville just installed custom SeaDek pads on his Carver Santego 380 (carveryachts.com). This custom kit is 6mm storm gray over black faux teak. Great job Eric!

Carver1 Carver2

To order this kit for your boat, contact customer service at customerservice@seadek.com or 321-632-4466 and reference part number Z104349.

Posted in Carver, Custom SeaDek, faux teak, marine nonskid, marine products, no slip seadek, seadek, SeaDek Marine Products | Tagged , , , , , , , , , , , | Comments Off on 1997 Carver Santego 380 – Swim Platform Pad

IFA Redfish Tour – Team SeaDek

On March 28th, Alan and Pepi of Team SeaDek placed 15th in the IFA Redfish Tour (www.ifatours.com/redfish-tour) in Titusville, FL.

IFA3

“Pre-fishing on Thursday went well despite high winds and dirty water conditions. We boated several redfish and some large trout as a bonus all though trout were not the targeted species for Saturday’s event.

Friday presented us with near unfishable conditions with higher wind predictions and the threat of storms with an approaching cold front. We knew the passage of the front would create difficult fishing conditions but we went with what we had found pre-fishing for the tourney on Saturday.

We didn’t boat a fish until nearly noon but within about 45 minutes we had two slot fish in the live well for weigh-in. We continued to try to upgrade our smaller of the two redfish but with time against us it just didn’t happen.

Pepi and I were able to place 15th out of 71 Teams in some pretty tough conditions.

Our next stop will be the 2nd leg of the Power-Pole Florida Pro Redfish Series Tournament held in Jacksonville, Fl on April 18th.

We would like to thank SeaDek Marine Products for all your continued support. We are honored to represent such an outstanding Company!!”

-Alan

AlanPepi

Nice job guys!

For more information on the Inshore Fishing Association, visit: www.ifatours.com.
For more information on the Florida Pro Redfish Series, visit: floridaproredfishseries.com.

Posted in Custom SeaDek, fishing tournament, Fishing with SeaDek, Florida Fishing, marine nonskid, marine products, no slip seadek, seadek, SeaDek Marine Products | Tagged , , , , , , , , , , , | Comments Off on IFA Redfish Tour – Team SeaDek

SeaDek Signs Sacksteder’s Customs (SC Wake) as a Certified SeaDek Fabricator

Sacksteder'sRockledge, Fla. (April 7, 2015) – SeaDek of Rockledge, Florida, would like to welcome Sacksteder’s Customs, owned by brothers Eric and Ryan Sacksteder, as a Certified SeaDek Fabricator™. Located in New Trenton Indiana, Sacksteder’s Customs (SC Wake) produces and installs custom SeaDek kits. Certified SeaDek Fabricators specialize in the entire SeaDek process from start to finish. They template boats, create CAD drawings, cut SeaDek EVA material using CNC technology, and install the final products assuring the perfect fit and finish. All SeaDek pads are installed using 3M™ pressure sensitive adhesive which is inspected and applied at the SeaDek manufacturing facility in Rockledge, Florida.

Sacksteders Custom Wake (SC Wake) specializes in custom designed SeaDek Marine Products.  In addition to SeaDek, they offer some of the best marine products out in the industry including Wet Sounds audio equipment, XS Power Batteries, and Pompanette Air heating and cooling systems.

The Sacksteders are brothers from Harrison Ohio who were literally born into the world of boating and the marine industry.  In 2009 they started SC Wake which specializes in all facets of marine life ranging from maintenance, detailing, wakeboard lessons, audio upgrades, to a full boat rehab. Their love of the industry and desire to properly deliver customers dreams is what separates them from would be competitors.  They are based out of New Trenton, IN and are currently working throughout the Midwest and West coast, and will be expanding their market as they continue to grow.

Having revolutionized marine flooring in the OEM and marine aftermarket SeaDek has launched the SeaDek Certified Fabricator program to make our products more readily available to the end user by partnering with regional fabricator/installers. This will shorten lead times dramatically, eliminate the need for customers to make their own templates and assure a high level of customer service. Certified Fabricators are factory trained and selected for their professionalism and commitment to quality. March 2015 will see the first Certified Fabricators come online with more to follow later in the year.

SC Wake
4101 US 52
New Trenton, IN 47035
Ryan: 513-266-4499
Eric: 513-615-9230
Web: www.SCWake.com
Facebook: www.facebook.com/pages/SC-Wake

Print

ABOUT SeaDek
SeaDek Marine Products is a leading manufacturer of a range of EVA non-skid products for marine and sports use. A viable alternative to carpet and molded-in nonskid products, SeaDek’s line of products are targeted for OEM boat builders, resellers and end-users. The company was originally formed to produce cutting-edge surf products and nonskid traction pads, including X-Trak® surf traction and K-Grip®, a line of pads designed for world champion surfer Kelly Slater. The company later expanded its product offerings to the boating industry thanks to its innovation with marine-grade EVA materials.

For more information or media images, please contact: promotions@seadek.com.
www.seadek.com

image 2image

Posted in Custom SeaDek, marine nonskid, marine products, no slip seadek, seadek, SeaDek Marine Products | Tagged , , , , , , , , , , | Comments Off on SeaDek Signs Sacksteder’s Customs (SC Wake) as a Certified SeaDek Fabricator

Custom SeaDek on a Nautic Star

Here’s a custom SeaDek kit we just finished for Carey, one of our customers. This is a 6mm storm gray over black kit with an embossed finish custom made to fit Carey’s Nautic Star (www.nauticstarboats.com). This kit features 3 fish rulers, custom graphics, and SeaDek logos.

NauticStar1 NauticStar2 NauticStar3

To order a custom SeaDek kit for your boat, please contact customer service at: customerservice@seadek.com or 321-632-4466.

Posted in Custom SeaDek, Fishing with SeaDek, marine nonskid, marine products, no slip seadek, seadek, SeaDek Marine Products | Tagged , , , , , , , , , , | Comments Off on Custom SeaDek on a Nautic Star

Hurricane 21 Sundeck Sport Before and After SeaDek

Check out the before and after pictures of the custom SeaDek project we did for Honda Marine:Honda Before and After Overhead_3pics

Mike from Honda Marine (marine.honda.com) brought their 2015 Hurricane 21 Sundeck Sport (www.hurricaneboats.com) fully equipped with a Honda Marine BF 250 Outboard to our facility for a full SeaDek transformation.

Honda Bow BeforeHonda Bow3Honda BowThis newly SeaDeked boat features 6mm mocha over black faux teak deck. The boat has the option of removing the seat cushions to make it easier to stand and fish, so we included 3mm mohca pads under the seat cushions to provide exceptional traction in these areas.

Honda Console BeforeHonda Console2Honda Bow2Honda DeckHonda Console Honda SternHonda3

A big thanks to Dennis, Mike, Gary, Frank and the rest of the team over at Honda Marine for letting us SeaDek this beautiful boat!

To order a custom SeaDek kit for your boat, please contact customer service at: customerservice@seadek.com or 321-632-4466.

Posted in Custom SeaDek, faux teak, Fishing with SeaDek, marine nonskid, marine products, no slip seadek, seadek, SeaDek Marine Products | Tagged , , , , , , , , , , , , , , | Comments Off on Hurricane 21 Sundeck Sport Before and After SeaDek

SeaDek and YellowfinOnly.com

SeaDek is now a proud sponsor of YellowfinOnly.com!

image

Welcome to Yellowfin Only! This forum is the most informative tool to share and learn information on the greatest center console boat ever built. Whether you currently own a Yellowfin or are interested in the Yellowfin brand we encourage you to join!

The Yellowfin family is loyal and this site provides owners with the opportunity to share a wealth of knowledge about Yellowfin boats.

Sincerely,
YellowfinOnly Staff
http://www.yellowfinonly.com/

Posted in Custom SeaDek, Fishing with SeaDek, marine nonskid, marine products, no slip seadek, seadek, SeaDek Marine Products | Tagged , , , , , , , , , , , , , | Comments Off on SeaDek and YellowfinOnly.com