Grouper – Fishing with SeaDek

Here’s another great photo from our buddy Captain Lance Moss with Surfari Charters down in Nicaragua. Nice grouper!


To order custom SeaDek for your boat, please contact customer service at: 321-632-4466 or

Posted in Custom SeaDek, Customer Photos, faux teak, Fishing with SeaDek, marine nonskid, marine products, no slip seadek, seadek, SeaDek Marine Products | Tagged , , , , , , , , , , , , , | Comments Off on Grouper – Fishing with SeaDek

Snow Camo SeaDek Sheet Material on a Tracker

Most people are familiar with custom SeaDek kits, CNC cut with precision tooling and graphics but did you know we offer DIY options as well? One of our best selling products is actually our large roll sheet material made from the same high quality UV resistant EVA foam as all of our custom and OEM work.

Here is a recent customer installation on his Tracker using SeaDek 5mm snow camo. Here is a direct link to the product page:  This material cuts easily with a sharp razor and comes with a PSA backing. Some people have taken shots at us on pricing comparing our material to low quality EVA only to find out that many of those cheap products don’t come with adhesive and to pay extra for it. A bigger problem for many is when they choose the cheap stuff it gets hard and peels up after only a season or two of hard use. Here is a previous article on choosing the right non-skid product for your application:

100_0307 100_0304

After 250 hours in our QUV SE Accelerated Weather Tester*SeaDek-NotSeaDek
100_0301 100_0306

Posted in DIY, Fishing with SeaDek, flatsboat, marine nonskid, seadek, SeaDek Marine Products | Tagged , , , | Comments Off on Snow Camo SeaDek Sheet Material on a Tracker

SeaDek and SeaTow

SeaTow1We recently worked with Captain Lu of SeaTow Fort Lauderdale to sponsor their four tow boats. Each boat is now SeaDeked with a 13mm Storm Gray over Black Anti-Fatigue Helm Station Pad featuring a lasered SeaTow logo.



About SeaTow (from
Sea Tow has been the on-water assistance fleet of choice for boaters since 1983. A franchise-based marine assistance organization headquartered in Southold, New York, Sea Tow was founded in 1983 by Captain Joseph Frohnhoefer after the U.S Coast Guard stopped responding to non-emergency calls.

Since that time, Sea Tow has grown into a thriving network of nearly 100 locations across the United States with additional offices in Europe and the Caribbean. This network consists of a dedicated team of captains, crew and support staff that are standing by, 24/7, to serve our members and other boaters.


*The SeaTow logos are laser treatment prototypes and not yet available for order.

Posted in anti fatigue mat, Custom SeaDek, marine nonskid, marine products, no slip seadek, seadek, SeaDek Marine Products | Tagged , , , , , , , , , , | Comments Off on SeaDek and SeaTow

Nautique Boat Building – Bring Your Child to Work Day 2015


Last week we made a set of mini boats to be constructed at Nautique’s “Bring Your Child to Work Day”. Each little engineer got to build and decorate their very own Super Air Nautique G23, fully made out of SeaDek EVA foam. The kids decorated their boats with markers, crayons and stickers to make each of them unique.

BoatBuilding7BoatBuilding8BoatBuilding1 BoatBuilding2

This little boat builder was super excited to show me his hand crafted boat named “The Colorful.”

BoatBuilding3 BoatBuilding9BoatBuilding5BoatBuilding10BoatBuilding4

Thanks to everyone over at Nautique for including us in their awesome day!

Posted in SeaDek Marine Products | Comments Off on Nautique Boat Building – Bring Your Child to Work Day 2015

Win a FREE SeaDek Fish Ruler!

Win a SeaDek Fish Ruler! Simply post a SeaDek photo on our FaceBook Page or Instagram and use the hashtag ‪#‎SeaDeked‬ to be entered in our drawing held Friday, May 8th at 2:00pm EST. The photo can be of your boat, a friends boat or anything with SeaDek on it.


Contest official rules:

Posted in anti fatigue mat, Custom SeaDek, fish ruler, Fishing with SeaDek, Kayak products, Kayaks, marine nonskid, marine products, no slip seadek, seadek, SeaDek Giveaway, SeaDek Marine Products | Tagged , , , , , , , , , , | Comments Off on Win a FREE SeaDek Fish Ruler!

SC Carts – Wakeboat Inspired Cart

Check out this wakeboat inspired cart made by SC Carts. This cart is SeaDeked with black over storm gray faux teak pads.

IMG_0151m IMG_0157m IMG_0164m



“This custom cart is the first one out of our new SVD (special vehicle division) that we introduced earlier this year. This build was based on a 2007 Club Car Precedent 48 volt electric golf cart. It is powered by Trojan batteries and is rolling on 12” Shift wheels from Fairway Alloys.

Everything was done in house from the tower fabrication to paint and upholstery and even the windshield accents were cut on our new CNC router table.” – Jeffery H. of SC Carts

Thanks for the great photos Jeffery!

SC Carts

Posted in Custom SeaDek, marine nonskid, marine products, no slip seadek, seadek, SeaDek Marine Products | Tagged , , , , , , , , , , , , | Comments Off on SC Carts – Wakeboat Inspired Cart

Team SeaDek – Power-Pole Florida Pro Redfish Series

Team SeaDek competed in the Power-Pole Florida Pro Redfish Series Tournament in Jacksonville on April 18th and are still in the running for the Panama City Showdown Championship in October. Great job guys!

Alan Pepiphoto-3

The last tournament in the series to qualify for the Championship will be in Titusville, FL on May 16th.

For more information on the Florida Pro Redfish Series, visit:

Posted in Custom SeaDek, Fishing with SeaDek, marine nonskid, marine products, no slip seadek, seadek, SeaDek Marine Products | Tagged , , , , , , , , , , , | Comments Off on Team SeaDek – Power-Pole Florida Pro Redfish Series

Jackson Cuda 14 SeaDek Kit Review

Here’s a great product review that Ty of wrote on the SeaDek kit he recently ordered for his Jackson Cuda 14 (

If there’s anything I’ve learned while on the water, it’s that being stealthy is a necessity. Something as simple as bumping a push pole on the side of a poling platform or lightly knocking a paddle on a kayak can cause a fish to go from feeding to high alert in an instant. One thing I always take note of when purchasing a new vessel is the different vibrations it puts off when you do different things.


For Instance, when I bought my Jackson Cuda 14 this year I noticed I would make a very subtle noise every time I stood up or sat down. Often times I would see a tailing redfish as I was standing, and would quickly sit down to approach from a seated position. While most people wouldn’t even notice this noise, I found that on some occasions the fish would either stop tailing or disappear completely if I was within casting distance of said fish. Something I couldn’t live with!


As a sight fishing fanatic, I spend more time standing and slowly paddling/pushing (which my Cuda 14 allows me to do comfortably) with the paddle than I do sitting while in my kayak. While this is one of the best ways to approach fish to sight cast to, it leaves you with the problem of having to do something with your paddle once you do locate the targeted species. I’ve found that gently placing my paddle on the gunnels (sides) of my kayak, and quietly picking up a rod to make a cast is the best method for me. Unfortunately, often times this will also cause a light noise and vibration that the fish can detect. Not to mention if it’s windy, your paddle will probably roll around and knock from side to side much like a teeter totter.

To this day, my Cuda 14 has yet to fail me with getting to the fish; but being human as I am, I have sent many a fish bolting off the flat due to being a little noisy on the water. After making a post on the Space Coast Kayak Anglers Group on Facebook regarding these concerns of mine, I received a lot of different info on how to make my kayak a little more stealthy. I found that luckily for those of us who aren’t quiet as a mouse, there is a noise reducing product out there for your skiff made by SeaDek.


A few days before the Punta Gorda IFA Kayak Tour in February, I decided to give SeaDek a call and order some non skid pads for my kayak. Not only did it arrive quickly with simple step by step instructions on how to install, but it was also pre cut to fit my kayak. In a matter of about an hour, I had SeaDek on the areas where my paddle, push-pole, and fishing rods rest; under my seat to reduce noise when standing/sitting; and just about anywhere I could set foot on my kayak for those times when I haven’t quite found my sea legs!


The morning after I installed all my non-skid pads, I ventured out to Pine Island Sound to prefish for the IFA Punta Gorda event and put my SeaDek to the test. I’ll let the pictures do the talking!

static1.squarespace-3 static1.squarespace-4static1.squarespace-5

With the added stealth from the new SeaDek Pads, I was literally able to come within a few feet of a tailing redfish in about 8″ of water. Although I didn’t get an eat from the fish pictured above, I was amazed at how close I could get to take pics or make a cast. Being able to set my paddle down without making any noise has been a game changer while sight fishing. Jackson puts grooves on their kayak to keep your paddle from rolling around…add a little SeaDek and it’s fool proof. Simply set down your paddle, pick up your rod, and make that money cast.

Also, for those like myself who believe in comfort over anything, the cushion on my feet made things much easier on my back and is just overall much more comfortable. It makes it much more bearable being out on the water for 12 hours at times!

After my first encounter with this product, I doubt I’ll ever own another skiff without it! Whether you’re fishing, shooting pics, or just enjoying the water from a kayak, flats skiff, or any boat; I highly recommend checking out SeaDek!

*This review has been reposted from ShallowWaterz Insiders (

Thanks for the awesome review Ty!

Please be sure to check out Ty’s blog ( and follow ShallowWaterz on Facebook (, Instagram ( and YouTube (

To order a stock SeaDek kayak kit in storm gray or army camo, visit: For additional colors and custom logos, please contact customer service at or 321-632-4466.

Posted in Fishing with SeaDek, Kayak products, Kayaks, marine nonskid, marine products, no slip seadek, seadek, SeaDek Marine Products | Tagged , , , , , , , , , , , , , , , , , | Comments Off on Jackson Cuda 14 SeaDek Kit Review

2015 Hobie Mirage Pro Angler 17T Kit Now Available!

At long last the much anticipated 2015 Hobie Mirage Pro Angler 17T ( stock kits are now available for purchase on our webstore. Stock SeaDek kayak kits are 5mm thick with an embossed texture, and are produced in Storm Gray and Army Camo.

Hobie Pro Angler 17 2015PA17_2 PA17_3PA17_1 PA17_5

Custom Kits
Custom kits are also available for order through our customer service department. These kits can be produced in any color combination and can include custom logo work. Here’s the prototype kit we made for Chuck Levi from KBB Outfitters (
This custom kit is Brown over Black Faux Teak with custom graphics. Please reference part #17718


For more information and additional images on our prototype kit, check out the blog post at

*Faux Teak kayaks kits are not generally produced due to the small parts most kayaks require. This PA 17 is an exception because the parts are larger than most kayak kits and we used a smaller, custom faux teak pattern.

About the 2015 Mirage Hobie Pro Angler 17T – from

PA17_8The new Hobie Mirage Pro Angler 17T is a fishing machine with comfort, stability and room for everything you need, including another person. Plus, it’s powered by the patented Hobie MirageDrive pedal system.

The fully adjustable Vantage XT seating can be setup in multiple configurations: in-line tandem, face-to-face social tandem, or as a single. The PA17T is the perfect platform to teach a young one how to fish, take your family member out, or simply fish hard with your best fishing buddy. Fishing rod storage, both front and rear, holds up to 12 rods and the new H-Rail System allows you to customize accessory placement.

Both users can stand and fish in comfort and each cockpit is fitted with a large rectangular hatch with pivoting tackle management system; there’s even additional under-seat storage for bringing plenty of tackle boxes. The Lowrance® Ready feature with pre-installed thru-hull cable plug outlets makes adding most fishfinders easy. Use it “guide style” where the aft passenger provides power and puts the front angler on the fish or add an optional trolling motor to use it like a bass boat. Add the optional Livewell XL for storing your catch or taking plenty of live bait.

The hull will cut through ocean swells and the drop down skeg provides solid tracking over long voyages. With three rudder control steering handles, you can position the boat from any seating location while you or your buddy battles the big one. This vessel has found its niche through human propulsion via the MirageDrive, the ability to launch in no-motor zones or areas with no boat ramp, and minimal maintenance thanks to its durable polyethylene hull and rigid components.


To order a Hobie PA 17T stock kit in storm gray or army camo, visit:
For additional colors and custom logos, contact customer service at or 321-632-4466 and reference part #17718.

Posted in Custom SeaDek, faux teak, Fishing with SeaDek, Kayak products, Kayaks, marine nonskid, marine products, no slip seadek, seadek, SeaDek Marine Products | Tagged , , , , , , , , , , , , , , , , , , , , , , , | Comments Off on 2015 Hobie Mirage Pro Angler 17T Kit Now Available!

SeaDek Reviews – We Want To Hear From You!

Here is a recent online review from a customer about his Hobie Mirage Pro Angler 14 non-skid kit:
photoThey take there time making them so yeah it takes a min to get it but when you open the box there is nothing but jaw dropping craftsmanship! I love mine probably more than my Mirage drive it’s my favorite thing about my hobie!! Click buy now you won’t regret it might’ve been on for over a year and watch the video

  • Did your SeaDek product meet your expectations? “Met expectations”
  • How satisfied were you with our customer service? “Extremely satisfied”
  • How did you hear about SeaDek Marine Products? “Online Review or Article”

We’d love to hear what you think of your SeaDek and your customer service experience, good or bad. Your feedback helps us become a better company. You can write a review for any of our products on our website.

All reviewers are automatically entered in our regular product giveaways!

Posted in anti fatigue mat, Custom SeaDek, Fishing with SeaDek, Kayak products, Kayaks, marine nonskid, marine products, no slip seadek, seadek, SeaDek Marine Products, seadek swim platform pad | Tagged , , , , , , , , , , , , , | Comments Off on SeaDek Reviews – We Want To Hear From You!