SeaDek on Captain Jimmy Nelson’s Bonefish

Installed some new pads on Captain Jimmy Nelson’s Bonefish Hill Tide 22′ yesterday. Added some branded hatch pads and updated the cockpit. Be sure to catch all new episodes of Extreme Fishing Adventures https://www.facebook.com/extremefishingadventures?fref=ts 

SeaDek_Girl_001 SeaDek_Girl_002 SeaDek_Girl_003 SeaDek_Girl_004 SeaDek_Jimmy_005Bonefish_003 Bonefish_002 Bonefish_001

Posted in Custom SeaDek, SeaDek Marine Products | Tagged , , , , , , , , , , , , , | Leave a comment

Custom SeaDek – Sea Ray 440 by Hydrotunes

Another outstanding custom SeaDek installation by our friends at Hydrotunes. www.hydrotunes.net  If you are in the Austin area please give them a call or stop in. All of their contact information is listed at the bottom of this post.

SeaRay_440_001 SeaRay_440_002 SeaRay_440_003 SeaRay_440_004 SeaRay_440_005 SeaRay_440_007 SeaRay_440_008 SeaRay_440_009 SeaRay_440_010

 

Hydrotunes
855-55-TUNES
(855-558-8637)
512.373.9456 cell
512.386.1303 fax
address:
3217 Ranch Road 620 N.Austin, TX 78734
www.hydrotunes.com

Posted in Custom SeaDek, custom swim platform pads, sea ray boats, seadek custom pads, SeaDek Marine Products, seadek swim platform pad | Tagged , , , , , , , , , , , | Leave a comment

SeaDek’s Closed-cell Foam Helps Quiet Sea Ray SLX Models

QUIETRIDE™

THE SCIENCE BEHIND THE SILENCE
A closer look at the exclusive Quiet Ride technology that reduces noise, vibration and harshness (NVH) up to 50 percent on a Sea Ray.

Screen Shot 2014-03-19 at 12.07.46 PM

THE PROBLEM:

Maximum performance requires sacrificing the comfort of the ride, because an engine at full throttle generates significant sound and vibration energy.

THE METHOD: Engineers measured 48 points on Sea Ray sport boats at idle and full cruising speed to isolate the sources of decibels, vibration energy and harshness. In-depth vibration analysis showed how to dampen and interrupt vibration flow at the source.

INTERPRETING THE DATA: Performance and a comfortable ride aren’t mutually exclusive if you can reduce vibration energy at the source. To accomplish this, engineers started from the literal drawing board, redesigning new Sea Rays with integrated Quiet Ride technology.

THE SOLUTION:

Exclusive to Sea Ray SLX models, Quiet Ride uses a multi-pronged approach to dampen NVH at its root sources.

FIT AND FINISH: Closed-cell foam knocks down NVH. Neoprene isolators and mounting brackets reduce vibration. Heavy-duty magnets, latches, bumpers and gaskets ensure silence from hatches. Wind-struck edges are fared to let the wind slip by silently.

ENERGY-DISSIPATING HULL LAMINATE: Sea Ray’s specially engineered hull laminates convert vibration and noise energy into heat energy, which water whisks away.

FULL-BEAM BULKHEADS: Full-beam bulkheads and full-stop blocks in the boat’s cavities trap and isolate energy, preventing sound from traveling and surfacing elsewhere on the boat.

BONDED STRUCTURE AND BUFFERED HULL:
A well-buffered hull offers acoustical insulation, while structurally bonded hulls, liners and decks reduce vibration.

TUNED TRANSOM®: Borrowing vibration-abating technology from space shuttles and jet engines, the Tuned Transom from Omni Products short-circuits energy at the source to dampen excessive noise.

Screen Shot 2014-03-19 at 12.10.00 PM

Get the full story: http://www.searay.com/Page.aspx/pageId/159578/Quiet-Ride.aspx

Posted in Boat Shows, sea ray boats, SeaDek Marine Products | Tagged , , , , , , , , | Leave a comment

SeaDek On A Canyon Bay

Saw this post on the Florida Sportsman Forum this week. This Canyon Bay was done by one of our SeaDek Custom Installers, Castaway Customs http://www.castawaycustoms.com/.

oPA7F9s (1)

Posted in Custom SeaDek, SeaDek Marine Products | Tagged , , , , , , | Leave a comment

G3 1656 CCJ With Army Camo/Black SeaDek

Nice looking kit posted the other day on http://www.tinboats.net/forum/viewtopic.php?f=21&t=29361&hilit=seadek&start=75  Army Camo SeaDek over Black with a brushed surface texture and routed logos on a G3 1656 CCJ.

2013-08-24_11-50-08_819 2013-08-24_11-50-24_869 (1) 2013-08-24_11-51-01_747 2013-08-24_15-46-49_944 DSC07536

Posted in Custom SeaDek, SeaDek Marine Products | Tagged , , , , | Leave a comment

Do It Yourself SeaDek Applications

photo

Here is a great example of what you can do with SeaDek DIY sheet material. One of our customers just sent in this photo of a pad he cut for his forward deck which he uses as a fishing platform. He simply purchased a large sheet from our online store: http://www.seadek.com/c-5-sheet-material.aspx , made a template and used a sharp razor to carefully cutout his pad. Application was the easiest part; just clean the surface with acetone or window clearer, peel and stick using our 3M marine grade PSA (pressure sensitive adhesive). It’s that easy.

 

Posted in Customer Photos, DIY, Fishing with SeaDek, flatsboat, SeaDek Marine Products | Tagged , , , , , , , , , , | Leave a comment

Ross Gallagher Getting It Done

Ross Gallagher from the Intrepid Angler sent these over last week. That’s quite a catch from a kayak! Way to go Ross! We recently made a kayak nonskid kit for Ross’ Hobie Pro Angle 14. Check out his install video: http://youtu.be/ou110BQfyKw

SeaDek Kayak Kits can be purchased here: http://www.seadek.com/c-97-kayak-non-skid-pads.aspx

The tarpon bite has remained consistent the past few weeks. Pods of hungry migratory (pretty sure) fish have been staging up. I really only have the chance to target them at night, but they are feeding in the same areas you’d target them during the day.
Hogy Hobie Kayak TarponI’ve had the best success using Hogy Lures 10″ Original Series Soft Baits rigged on circle hook using the Hogy Stainless Bait Keeper – It’s like a hitch hiker on steroids. When fish are not feeding on top, use a large 7″ – 10″ paddle tail on a 1oz – 2oz Heavy Duty Jig Head. I like the Barbarian Series Jigs, they are super sharp, strong and have a pretty decent landing ratio for tarpon (usually 40-50%)
Boat Side Landing Tarpon

Tackle wise, I’ve been very happy using my Sewell 8′ Custom Tarpon Rod –Shimano Sustain FG 10K – 50lb Power Pro and 80lb Mono Leader. Stop by Anderson Tackle of S. Fort Myers and he can order those Sustain’s in time for season. I’ve landed 2 seasons worth of adult tarpon on the reel and it’s held up incredibly well. It’s also super light when paired with the Sewell Rod – Just under 2lbs.

Hope the info helps. I can’t wait until fishing really turns on in the next couple weeks.

– Capt. Ross

Hobie Tarpon Hogy Lures
View the full article here: http://theintrepidangler.com/march-tarpon-fishing-report-fort-myerscape-coral/

Posted in fish ruler, fishing tournament, Fishing with SeaDek, Florida Fishing, Kayak products, Kayaks, SeaDek Marine Products | Tagged , , , , , , , , , | Leave a comment

T. Maximus March Madness Trifecta Race Weekend ReCap

From our friend and mad man Thomas Maximus:

A Weekend of Awesomeness…with Epic SoCal Summer weather and Three Paddling Races beginning with a 5 Mile SUP Race followed by an 11 Mile Outrigger/OC-2 Race on Saturday at the 26th Annual Dana Point Harbor Challenge finishing 1st Overall SUP and slipping back to 2nd Place OC-2 with a sprint to the finish after leading the entire race.

Early Sunday morning attended the 4th Annual Adler 5.2 Mile SUP Race in Long Beach finishing 1st Overall.

Looking forward to just doubling down with next weekend’s 5 Mile SUP race followed by a 16 Mile Outrigger/OC-2 Race in Marina Del Rey.

Photo Credit. Mike Muir, Erik Nordskog & unknown/StandupPaddleMagazineFB

DanaPointSUPRaceMuir3.15.14DanaPointOutRaceEric3.15.14photo 1 photo 2 photo 3

Posted in SeaDek Marine Products | Tagged , , , , , , , , , | Leave a comment

Ballast Point Spirits Fishing Team Takes 1st!

Fished the #SBS inshore division today based out of Mission Bay San Diego for Calicos and Sand Bass. Took first place and Big fish which weighed 6.94 lbs and 22.28 lbs was our total weight for our 5 fish. Started fishing Deep and finished fishing the beach, all our fish came on the new Big Poncho 5″ & 6″ swim bait on a 1oz Bladerunner Tackle weedless head and 2 oz Bladerunner Tackle standard head. Really stoked on our first win of the year. Want to thank all our sponsors for their support. Ballast Point Brewing & Spirits BassKnuckles.com SeaDek Marine Nonskid Watermans Sunscreen Owner Hooks Mercury Marine Bladerunner Tackle Hotsauce and #Deathsticks

Posted in fishing tournament, Fishing with SeaDek, SeaDek Marine Products | Tagged , , , , , | Leave a comment

SeaDek’s Super Air Nautique 230 FOR SALE!

SeaDek’s Super Air Nautique 230 is up for sale. Built in May, 2013, under a hundred hours on the engine and a ton of upgrades this boat is a wakesurfer’s, wakeboarder’s or wakeskater’s dream come true. Meticulously maintained and stored indoors year round it is in exceptional condition. The boat is located at the SeaDek factory in Rockledge, FL.

Asking price is $85,000

SeaDek will make a fully customized SeaDek kit for the new owner and remove logos from the hull.

The building of this boat was fully documented online. Click here for the articles: https://www.seadek.com/blog/seadek-boat-build-day-2/

President and CEO of SeaDek putting in work behind our Super Air Nautique 230 from Jason Gardner on Vimeo.

SeaDek – SUPER AIR NAUTIQUE 230 – 2013
Options:
– Package Type: Team
– Coastal Package: Includes Salt Water Ready Components-
– Replace factory ballast with two PiggyBack Rear Factory Ballast Upgrade: Bag Size 1,100 lbs – Fly High 50″ x 24″ x 24″ and a 650lb bow sac
– Engine Type: CWS 409 HP CES
– LINC Map Card: ROW
– Bimini – Tower Mounted
– Battery Maintenance System 110 (Integrated Charger)
– Interior courtesy lights
– Integrated LED tower speaker lights
– Ocean LED Underwater lights
– LED cup holders
– PTM Edge premium mirror 6 x 20, VR-140 Elite housed in a precision CNC machined 6061-T6 billet aluminum housing with bracket. Offers unparalleled viewable range (140-degrees) and clarity via prescription grade optics.  www.ptmedge.com
– Cover – Towable/Mooring
– Cover – Platform
– Stainless Steel Windshield Upgrade
– Nautique Surf System
– Swivel board racks (2) with button release
– Hull Bottom Color Placement
– Deck Stripe Color Placement
– Platform Color Placement
– Deck Stripe Color: GUN METAL FLAKE
– Hullside Accent Color: ONYX BLACK
– Hullside Color: GUN METAL FLAKE
– Hull Bottom Color: ONYX BLACK
– Platform Color: ONYX BLACK
– FCT Color: ONYX BLACK
– Interior Theme Color: TITANIUM GREY
– Main Stripe Color: TITANIUM GREY
– Accent Piping Color: ONYX BLACK
– Accent Texture Color: BLACK CARBONO
– Dash Pod Color: BLACK
– Non-Skid Color: Bimini Blue over Storm Gray Custom SeaDek kit bow to stern including trailer pads
– Seat Bottom Vinyl Color: SILVER CLOUD
– Wake Package – Bow and Stern
– Ballast System
– Hydro-Gate with SportShift, Pull Out Cleats (4),
– Flip-Up Driver’s Seat
– Sun Pad Filler Cushion, Bow Filler Cushion
– Nautique LINC 2.0 Helm with Navigational Mapping and Zero– – Off GPS Speed Control
– Dual Batteries with Selector Switch
– Tournament Propeller
– Removable Swivel Wakeboard and Wakesurf Racks
– Dual Lean Back Removable, Flight Control Tower
– Dripless -Shaft Packing
– Low Emission Fuel System
– Keyless Ignition System
– Premium Steering Wheel
– Freshwater Flush with Stainless Steel Inlet Fitting
– Stainless Steel Gas Shocks
– Anodized Aluminum Structural Components
– Corrosion Resistant Wiring Harness
– Tower Shock Size is 350#

Custom Roswell Wake-Air Audio Package:
– One RMA 500.1 Mono Amplifier powering a RMA 1211 Dual Voice Coil 12” Subwoofer mounted in a custom vented enclosure.
– One RMA 500.4 Amplifier powering 6 RMA 6510 In Boat Speakers.
– One RMA 500.4 Amplifier powering a Focal P25 10” Subwoofer, in the factory location and 4 Focal Access 690 CA G1 6x9”s on the tower.
– Everything is wired using RMA Full Spec Cables.

Custom BoatMate Trailer:
– 230 Tandem Axel
– Galvanized
– Base color: Gunmetal Metallic
– Accent color: Onyx Black
– 18” Black Moto Metal 961 Wheels
– Painted tandem fenders with valence
– Full sized trailer mounted spare
– Step-mate transom step
– Stainless retractable transom straps
– Runway lighting
– Painted surface mount LED trim rings

Contact Jason Gardner 321-632-4466 or promotions@seadek.com

SeaDek_SAN_230_001 SeaDek_SAN_230_017 SeaDek_SAN_230_015 SeaDek_SAN_230_014 SeaDek_SAN_230_013 SeaDek_SAN_230_012 SeaDek_SAN_230_011 SeaDek_SAN_230_010 SeaDek_SAN_230_009 SeaDek_SAN_230_008 SeaDek_SAN_230_007 SeaDek_SAN_230_005 SeaDek_SAN_230_004 SeaDek_SAN_230_003 SeaDek_SAN_230_002

DudesOnTheSan230_0019238680363_f675791a10_o

 

 

 

 

 

 

Posted in Boat Shows, nautique, seadek, SeaDek Marine Products | Tagged , , , , , , , , , , , , , | Comments Off on SeaDek’s Super Air Nautique 230 FOR SALE!