Justin Allgaier SeaDek Pads

Just finished up these custom floor mats for NASCAR (http://www.nascar.com/) driver No. 51 Justin Allgaier. We’re really excited to be working with Justin on these one of a kind mats to be used at the races outside his trailer and in the display/work areas. These pads are made from 10mm storm gray with 3mm black on top and race red inlaid logos. We also added some textured features with a new process we’ve invented. Note the etched wave patter. We’ll post some follow up photos of the pads in use real soon.

Special thanks to Robby Maschhaupt for helping to put this project together.

Justin_Allgaier_NASCAR_001Justin_Allgaier_NASCAR_002Justin_Allgaier_NASCAR_003 Justin_Allgaier_NASCAR_008 Justin_Allgaier_NASCAR_007 Justin_Allgaier_NASCAR_005 Justin_Allgaier_NASCAR_004

Posted in Automotive, SeaDek Marine Products | Tagged , , , , , , , , , | Leave a comment

Hog Wild For SeaDek

Last year we SeaDeked a Proline 2950 for our buddies over at Spearing Magazine (http://www.spearingmagazine.com). The boat turned out great and they’ve been getting a lot of use out of their pads. They nabbed a hogfish this weekend that was a perfect match for the custom hog we routed into the cockpit hatch cover. Thanks for the photo Jeromy!



Posted in SeaDek Marine Products | Tagged , , , , , , , , , , , , , , | Leave a comment

Get Some Salt On Your SeaDek – From Florida Sportsman

When I’m out on the kayak for several hours in a day, or trying to be as quiet as possible when casting to a shallow water redfish, I try to look for ways that will either give me an advantage on getting a bite or at least making it a bit more comfortable when confined to my plastic watercraft for hours on end.


This article has been reposted from: http://www.floridasportsman.com/2014/02/27/get-salt-seadek/
by Mark Naumovitz • February 27, 2014

I had known about SeaDek for a while, seeing the padding they make for boats and also for coolers, to give additional comfort when skipping on the water in a boat or adding more traction on otherwise slippery wet decks, but when I saw they were coming available for kayaks, my feet started singing another tune. My kayak fishing technique is evolving into more standing and sight fishing, waiting for that shot at a trout sitting in the pothole or a spooky redfish just ahead of my kayak; even if it sacrifices more bites, the thrill of sight fishing one is bar none. I fish out of a Hobie Revo 13, which is not usually meant for a standing/sight fishing type of kayak to my knowledge, but fits my frame just right. The time I spend standing is usually on a hard plastic hatch that has protruding hinges with not a ton of surface area so I needed a type of padding that would be long lasting, durable, cost efficient, and good looking.

After getting on the SeaDek website, I read where they could send you template material so you could trace out your specific kayak and have a custom kit made for your rig! Within a few days the kit was at my door and it was time to start the measuring/template process. After this was completed, I mailed the template back in to SeaDek and waited for them to do their magic – after a few weeks my brand new kit was ready to go. Installation was a breeze: clean surface, peel the backing off the Seadek, and stick. Once on and cured, it’s not coming off.

After having used it on the kayak for several weeks now, it has stood the test against blood, heat, and abuse. I now have a sound deadening layer of protection that quiets any clangy anchors on my surface, as well as tackle boxes being thrown around, camera equipment, and the like. My feet have felt much better after several hours of standing and casting, decreasing my chances of slipping on the wet surfaces.

On a most decent trip, fishing Flamingo last weekend for the first time at the 2nd Adventure Fishing World Championship, certainly tested the ninja skills of being quiet in skinny water. Most of the water we covered along the 20 mile trek was two feet or less, and getting closer to a fish meant more chances of it picking up on our vibrations and/or sounds that we might make when getting ready to make a presentation. Having an additional layer of sound deadening material really helps in situations like this, whether it be under you in your “cockpit”, behind you under your gear, or around your deck to soften the blow of paddles or push-poles being moved around. Also, if you have ever paddled a kayak miles on end, you know how rough it can be on your “bottom”, and getting up to stretch can be a welcoming practice to reviving your paddling/peddling efforts. Again, since most of the water was skinny, poling or paddling was the majority of the propulsion, in which the layer of SeaDek was comforting to be able to get up on vs a hot and hard plastic surface.

The material is a UV protected non-absorbent foam and has a textured micro-dot surface that is made in the USA. The price for a custom kit goes around $110-$150, depending on your kayak. Many colors are available to choose from and you can even get custom name printing in the material as well.

For more information, visit http://www.seadek.com/c-97-kayak-non-skid-pads.aspx.

See below for more photos!

Read more: http://www.floridasportsman.com/2014/02/27/get-salt-seadek/#ixzz2ucl1aY1P

Mark_Naumovitz_003Mark_Naumovitz_007Mark_Naumovitz_008 Mark_Naumovitz_006 Mark_Naumovitz_005Mark_Naumovitz_002 Mark_Naumovitz_001Mark_Naumovitz_009 Mark_Naumovitz_010

This article has been reposted from: http://www.floridasportsman.com/2014/02/27/get-salt-seadek/
by Mark Naumovitz • February 27, 2014

Posted in Kayak products, Kayaks, SeaDek Marine Products | Tagged , , , , , , , , , , , , , , , , , , , , , , , , , , | Comments Off on Get Some Salt On Your SeaDek – From Florida Sportsman

Versa Board and Hobie Pro Angler 14 SeaDek Kayak Pads

Lot’s of new products coming through the factory today. These pads are for a Versa Board (snow camo over black) and a Hobie Pro Angler 14 for Redfish Chuck up at Kayaks By Bo. The Versa Board isn’t on the store yet but will be soon. The Hobie is available in 2 stock colors or any custom color combo.

SeaDek online store kayak pad selection: http://www.seadek.com/c-97-kayak-non-skid-pads.aspx

VersaBoard_James_Frostick_001 VersaBoard_James_Frostick_002 VersaBoard_James_Frostick_003 VersaBoard_James_Frostick_004Versa Board: http://www.liquidlogickayaks.com/versa.cfm


Hobie Pro Angler 14: http://www.hobiefishing.com/mirage/mirage-pro-angler-14/

Posted in Kayak products, Kayaks, SeaDek Marine Products | Tagged , , , , , , , , , , , , , , , , , , , , , , , , , , | Comments Off on Versa Board and Hobie Pro Angler 14 SeaDek Kayak Pads

Kayak NonSkid Traction Kits From SeaDek

New kayak non-skid kits from SeaDek are being added to our catalog every week. Made from UV resistant eva foam and applied with 3M pressure sensitive adhesive these pads are superior to other products on the market made from cheap, low density foams that will crack and chalk after a season. Available in 2 stock colors that are ready to ship today or customizable with any of our SeaDek color combinations with or without custom logos or graphics these pads are perfect for all types of kayaks and SUPs. After a long day of fishing on a kayak with SeaDek, your legs will thank you. Best of all SeaDek pads are Made in the USA!

View our current selection:

Call 321-632-4466 or email customerservice@seadek.com for more information.

If you don’t see your make and model we can work with you to create one yourself!
















Posted in Kayak products, Kayaks, SeaDek Marine Products | Tagged , , , , , , , , , , , , , , , , , , , , , , , , | Comments Off on Kayak NonSkid Traction Kits From SeaDek

Gear Crazy At The 2014 Miami Boat Show – SeaDek

Randy Vance from Boating Magazine stops by the SeaDek booth at the 2014 Miami International Boat Show.




Posted in Boat Shows, SeaDek Marine Products | Tagged , , , , , , , , , , , , , , , , , , , , , , | Leave a comment

Captain Lee Lucas of Marathon Sports Fishing – SeaDek Bolsters

Some great photos from Captain Lee Lucas of Marathon Sports Fishing (http://www.marathonSPORTSfishing.com). Note the custom SeaDek coaming bolsters. Order SeaDek bolsters for your boat today! http://www.seadek.com/c-8-coaming-bolsters.aspx


DSC_3162 DSC_1111DSC_5181

Capt. Lee Lucas
L&L First Love
P.O. Box 1709, Marathon FL 33050
Cell: 305-393-0558

Posted in Custom SeaDek, SeaDek Marine Products | Tagged , , , , , , , , | Leave a comment

Win Free SeaDek Products!

This week we’re giving away another SeaDek Helm Station Pad and Fish Ruler Prize Pack and we’ll even throw in a SeaDek shirt. Just “like” this post on our FaceBook Page (https://www.facebook.com/SeaDek) and you’re entered to win. Like our page and repost this for additional opportunities to win. Thanks and good luck!

Drawing will be Friday afternoon. Go!


Posted in Helm Pad, helm station pads, SeaDek Giveaway, seadek helm pads, SeaDek Marine Products | Tagged , , , , | Leave a comment

Thomas Maximus Takes 1st In SUP & Outrigger Race

Here are a few pics from Saturdays SUP & Outrigger Race in Redondo Beach, CA. Thomas Maximus (www.seadek.com) awarded another 1st Place Overall/Unlimited SUP in 5 Mile Race & 1st Overall Outrigger/OC-2 in 10 Mile Race w/ Ryan Murphy.

photo 1 photo 2 photo 3


Posted in SeaDek Marine Products, Stand Up Paddleboard, sup traction | Tagged , , , , | Leave a comment

This Week’s SeaDek Giveaway Winners!

Congratulations to David Snyder, Lisa O’Brien and Rob Nadelman. They are this week’s winners of a SeaDek fish ruler! Please message me your mailing address and we’ll get your fish rulers right out to you.

Like us on our FaceBook page for more SeaDek giveaways: https://www.facebook.com/SeaDek

Thanks to everyone who entered this week’s drawing and keep an eye out for our next giveaway. Have a great weekend!


Posted in fish ruler, Fishing with SeaDek, SeaDek Marine Products | Tagged , , , , , , , , | Leave a comment