Helm Station Pad Installation Instructions
The only items you’ll need for your installation should be a sharp razor blade, masking tape, window cleaner and a clean cloth.
Thoroughly clean the area where SeaDek will be applied. We recommend using a cleaner that will not leave any residue. A glass cleaner used with a clean cloth or scotch-bright pad works well. Make sure the area is completely dry before applying the pad.
If there is any glue, grease, adhesive or other substances on the area that the pads are to be applied, mineral spirits followed by acetone may be used to remove them. Be sure to use a glass cleaner afterwards as suggested above. Again the surface must be completely dry before applying the pad.
If pads are being applied to a new boat right from the factory it is very important that all mold release is thoroughly removed from the boat surface. Be sure to check with the boat manufacturer before applying pads. Arrange the pad to the exact location to be covered and verify proper fit and placement. Once you are sure the pad is the right size and are happy with the location turn the pad over so that the paper backing is facing up. With a sharp razor, carefully cut the paper backing right down the center being careful not to cut into the pad. From the center, peel up each side a little to make sure the backing is completely cut all the way through.
Turn the pad back over and reposition the pad exactly where you want it to be installed. Firmly secure one side of the pad to the application area using two-inch masking tape.
Now lift up the untapped side of the pad with one hand and loosen the paper backing with the other. This process is a little easier if you have someone to help you out. Slowly and carefully pull up the rest of the backing while applying the pad to the platform. Use your hand to apply pressure to the pad to assure a firm bond between the pad and the platform. Now remove the tape from the other side of the pad and repeat the application process just like you did on the first side. Take time to press the entire pad into place with your hands especially around the edges of the pad.
You can watch a video demonstration of this installation on our website: http://www.seadek.com under the DIY section.
Helm Station Pad Features
SeaDek manufactures the finest helm pads on the market today. Made from closed-cell EVA materials, specifically formulated for the marine environment, SeaDek's Stock Helm Station pads features 15mm foam to absorb impacts and micro-dot embossing on the surface for durability and safety. Available in two sizes, 14"x36" and 16"x39", color options are White over storm gray, Caribbean blue over storm gray, Seafoam Green over storm gray, Beach sand over black, Black over storm gray, Storm gray over black, Cool gray over storm gray, Mica over black, Army camo over black, Faux teak brown over black. If the two standard sizes won't work, SeaDek offers custom helm pads as well. You can even have custom text routed right into the pad.
Stock Helm Station Pads: 14"x36" and 16"x39" available in all stock colors over storm gray. Embossed surface.
Faux Teak Helm Station Pads: The look of teak, comfort of EVA foam, 16"x39" with sanded textured surface.
Custom Helm Station Pads: Custom pads can be made in a large number of sizes and colors. Custom logos, text and graphics can be added. Minimum order on custom pads is $149.95. Click HERE to request a quote.
All SeaDek products feature pressure sensitive adhesive. Simply pull the backing off and press the helm pad into place. Your pad stays put and so do you.
Check out all of our Helm Station Pad photos
You can trust that your order will be quickly processed and safely delivered. We can ship products anywhere in the United States or around the world. When you place an order we will estimate delivery dates based upon the availability of your item(s), shipping method selected and your shipment’s destination. Our shipping charges are determined by the total dollar amount of your order, excluding applicable sales tax.
For international shipping, expedited shipping or any other shipping related questions or concerns please contact us by phone (321.632.4466 or toll free: 888.964.6860) or email email@example.com
The SeaDek Factory is located in Rockledge, Florida. Orders may take up to 72 hours to process
Please call or email for a return authorization. A 10% restocking fee will be applied to all sheet material returned for credit, 30% on Swim Platform Pads. All items must be in good unused condition and packaging must remain intact or restocking fee will be 30%.