Your company account is blocked and you cannot place orders. If you have questions, please contact your company administrator.

Step Kit

In stock
SKU
Config_Retail10
Step Kit is rated 4.8 out of 5 by 30.
  • y_2019, m_7, d_13, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_30
  • loc_en_US, sid_Config_Retail10, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_seadek
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 109.78ms
  • REVIEWS, PRODUCT
^
$28.95
-
+
Great for slippery trailer fenders, steps, and boat ladders SeaDek Step Kits are made from our 5mm thick PE/EVA blended foam material. Each kit comes with four 3.75"x12.75" pieces of our soft yet durable, non-absorbent PE/EVA blended foam material that provides excellent traction when wet or dry. Our step kits are available in a variety of colors and backed with our 3M pressure sensitive adhesive to provide an easy peel-and-stick application.
Rated 5 out of 5 by from Easy to install and looks Great! I just installed it on a step into my Glacier Bay boat. Extremely easy just peel and stick. Cuts with scissors or knife with ease. Just make sure you put it where you want it the first time because once you stick it down it won't come off or move. Love the custom look and great non skid even when wet. Beats the old black sandpaper stair treads. I did think it was a little pricey. Time will tell how well it hold up.
Date published: 2015-12-28
Rated 5 out of 5 by from Exactly what I wanted! I've bass fished for over 3 decades. But after going to a bayboat I still wanted to keep my rods lying on the front deck just like we've done in bassboats for decades. Obviously without carpet that posted a problem, until I decided to try these step pieces from Seadek. They work PERFECTLY to protect my rods&reels when freshwater fishing & my deck remains open & clear while saltwater fishing. Great job Seadek!
Date published: 2018-08-17
Rated 5 out of 5 by from Great Product Bought this to use as stepping pads for our ski boat, got tired of slipping around when trying to take wakeboards down from racks. Perfect fit, easy to cut and apply, and so far they are holding up well to our use. Going to have to order additional pieces for sunpad area and looking at swim step next!
Date published: 2018-10-19
Rated 5 out of 5 by from Real happy Used the step kit pieces as protection for my fishing reels where they make contact with the side of the boat under the gunnels in a flats boat. The reels are expensive and rubbing against the surface was causing reel rash. Problem gone, and the color of step pieces match the boat.
Date published: 2016-10-29
Rated 5 out of 5 by from This worked out very well I used the step kit to cover some unsightly holes left from a previous owner's external rod holders. You'd never know they were there and the SeaDek looks great. As a bonus, there are now non-slip foot landings on the gunwales. Function and style. Excellent product.
Date published: 2015-10-09
Rated 5 out of 5 by from Great product - better shipping options please? Fantastic product. Love this stuff. Very tough. I have no trouble with it sticking to the boat. I sure wish they could come up with some cheaper options to ship it though. Shipping cost more than the product it self.
Date published: 2015-07-24
Rated 5 out of 5 by from Excelent product I installed my step kit this weekend and it worked fantastic! We tie up with a lot of people and we did not have a no slip pad on the sides of the boat. Once installed, it was put to immediate use
Date published: 2017-07-05
Rated 5 out of 5 by from Great footing Put these on the steps leading to the cabin ,they were very slippery ,not any more , The steps are now very safe ,great traction ,and very comfortable on bare feet !!! I highly recommend
Date published: 2017-07-13
  • y_2019, m_7, d_13, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_30
  • loc_en_US, sid_Config_Retail10, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_seadek
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 28.25ms
  • REVIEWS, PRODUCT

Is the thickness 3mm or 5mm or something else?

Asked by: Jaxkise1
Hello Jaxkise1 Thank you for your interest in SeaDek Marine Products. The step kits are created in our 5MM thickness. If you have any other questions, please give us a call and a representative can assist you. Thank you, Customer Advocate Team SeaDek Marine Products 5440 Schenck Ave. Rockledge, FL 32955 321-632-4466 Phone 321-806-4387 Direct www.seadek.com
Answered by: SeaDek_responder
Date published: 2019-02-06

The Step kit-4 pc, Beach sand color, I have a 5 step ladder, is a 5 pc kit available

Asked by: Sarge
Hello Sarge, Thank you for your interest in SeaDek Marine Products. We do not offer a 5 piece step kit at this time but we would be happy to create one for you! If you do not wish to have custom pads created, we recommend purchasing either two step kits or sheet material and cutting it to size yourself. If you have any questions, please give us a call. Thank you, The SeaDek Customer Service Team SeaDek Marine Products 5440 Schenck Ave Rockledge, FL 32955 321-632-4466 Phone 321-632-7019 Fax www.seadek.com
Answered by: SeaDek_responder
Date published: 2018-08-24

I’ve built a ten foot wooden rowboat, stained and varnished on the inside.  I’m looking for some non-skid for the floor battens and suspect that your step pads might be the ticket.  Could I email you a photo and see if you agree?  Thanks.

Asked by: Sailor Pete
Hello Pete, Thank you for your interest in Seadek. Since you wood is sealed, Seadek would work great with your boat. We hope this helps!
Answered by: SeaDek_responder
Date published: 2018-07-25

I have Seadek in my 2017 Malibu 23LSV in Grey over Black brushed finish. I am interested in installing a step kit on the gunnels for entering the boat from our boat lift. What is the texture of the grey over black step kit? Same as factory?

Asked by: Malibu E
Thank you for your interest in our Step Kits. The Storm Gray over Black Teak step kits are with the brushed texture. The step kits in the single colors are all embossed.
Answered by: SeaDek_responder
Date published: 2018-06-28

Is there a way to select the brushes design step pad kits rather than embossed? The options drop downs appear to only allow you to choose a color or faux teak. If midnight black is selected will this come in embossed or brushed?

Asked by: TylerRNEMT
Hello TylerRNEMT, Thank you for your interest in SeaDek Marine Products. If the black is selected the step kit will come in the embossed texture. If you would like to have them brushed, it will become custom pricing. If you would like to move forward with a custom order we ask that you give us a call and a customer service representative will be able to assist you. Thank you, The SeaDek Customer Service Team SeaDek Marine Products 5440 Schenck Ave Rockledge, FL 32955 321-632-4466 Phone 321-632-7019 Fax www.seadek.com
Answered by: SeaDek_responder
Date published: 2017-11-13

Could you give me an idea of cost for a 25" X 40" teak swim platform before I order a kit?.  have pics.  May do top side too if affordable. '08 Larson Cabrio 260.

Asked by: New Boat Owner
Hello , Thanks for the interest in SeaDek. Unfortunately we do not yet have a full kit for your model 2008 Larson Cabrio. You do have a couple of options: 1. Contact one of our Certified Fabricators or Installers in your area to help you with a custom order (http://www.seadek.com/customseadek.aspx) 2. Determine the size of the area to be covered and order the appropriate size sheets (http://www.seadek.com/c-5-sheet-material.aspx) pattern, cut and install it yourself. SeaDek is easy to cut and with a reasonable amount of care excellent results can be achieved at a considerable savings over a custom SeaDek solution. 3. Order a template kit (http://www.seadek.com/c-9-template-kits.aspx) make template patterns of the areas you would like to cover and return them to us. Photos taken of the completed templates taped in place on the boat are very helpful as well. We will then scan the patterns and provide you with a quote to make a custom fitted pad for your boat. Our largest sheet of material is 39"x77" which covers approximately 12-18 square feet. The cost of this size sheet for custom cut pads is $335.00 + shipping for our microdot embossed material and $419.00 + shipping for our brushed teak material. With the dimensions you've provided it will be a full sheet of material which will be the $335 for standard embossed or brushed and $419 for our faux teak option. I should mention that we do not stock custom pads or swim platform pads. They are all made to order. Due to this time of year being our busy season we are looking at a 6-8 week production time for custom orders and about 3 weeks from existing, cataloged designs. Sheet goods for DIY are usually on hand and can be shipped right away. Please note that faux teak is not offered in our DIY stock sheets. Please let us know if we can assist you further. Thank you,
Answered by: SeaDek_responder
Date published: 2017-07-25

Does the step kit come in the teak material?

Asked by: Jeremyrig
Hello, The step kit does come in the teak pattern. If you click the drop down for colors they teak option will appear at the bottom. If you need assistance with placing your order please call our customer service team and any representative will be able to assist you. Thank you Customer Service Team SeaDek Marine Products 5440 Schenck Ave Rockledge, FL 32955 321-632-4466 Office 321-632-7019 Fax www.seadek.com
Answered by: SeaDek_responder
Date published: 2017-06-22

I am looking for two step pads that are similar to what I have on my Centurion Carbon Pro. I have the grey teak floor but I believe the current side steps on just storm grey with Black trim. I can send a photo to confirm if needed.

Asked by: RAWSki
Hello RAWSki, Thank you for your interest in SeaDek. A separate E-mail will be sent to your personal E-mail address to discuss kits and pricing separately. Thank you, Sincerely, The SeaDek Team 5440 Schenck Avenue Rockledge, FL 32955 321-632-4466 customerservice@seadek.com www.seadek.com
Answered by: SeaDek_responder
Date published: 2017-04-19
  • y_2019, m_7, d_14, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_19
  • loc_en_US, sid_Config_Retail10, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_seadek
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 131.61ms
  • QUESTIONS, PRODUCT